THE CHARACTERISTICS OF THE LOSA AIRT FRAME
Model of 2017, also marketed in 2019
Frame Kit : TT
High quality materials. Use of unidirectional carbon fibers with high tensile strength Torayca® T700 and T800S. The material chosen is wisely distributed and contributes to increasing the resistance to impacts to avoid breaking the frame.
Optimization of Driveability. The LOSA AIRT model is equipped with a tapered headset: 1 “1/8 upper bearing, 1” 1/2 lower bearing. This solution guarantees an excellent driveability of the frame.
Mixed comfort stiffness. The geometries of the LOSA AIRT have been developed to make the parts where the transfer of power between the runner and the frame rigid in order to minimize energy waste. The frame has also been designed to make even the rider’s comfort optimal.
Compact. The frame is very compact, so rigid and snappy. Aesthetically all cyclists can have a considerable advantage because the bike is very slender.
Top aerodynamics. The LOSA AIRT project was born with the concept of minimizing the resistant impact of the air flow on the frame. The aerodynamic optimization of the LOSA AIRT goes through the full inner cable technology, the design of the tubes and the placement of the front and rear brakes so as to minimize air resistance.
Direct Mount Brake System. In the Direct Mount braking system, the brakes are fixed to the frame by two axes, instead of one as in the classic scheme. Braking is more powerful and more flexible. Furthermore, since the braking system is close to and integrated into the fork and posteriors it guarantees excellent aerodynamics.
Design and elegant liveries. The design of the LOSA AIRT is based on the elegance of the shapes and the liveries have been designed to enhance the shapes through the combination of geometries and colors.
Warranty on the frame kit extended to 5 years. The high quality standard of the frame kit allows us to extend the standard warranty provided by the Law.
- Material: Torayca® T700 Mixed Full Carbon T800S
- Lay-up (fiber direction): UD (Unidirectional)
- Weight of the rough frame (Size M): 1.800 + -35 gr.
- Weight of the raw fork: 425 gr.
- Seatpost weight: 225 gr.
- TT Handlebar Weight: 435 gr.
- Measurements: 4 size (S, M, L, XL)
- Tapered headset: 1 “1/8 upper bearing, 1” ½ lower bearing
- Bottom Bracket: BB386
- Groupset: Traditional Shimano
Mode of supply
1) Frame kit in standard sizes 2-color painted with standard livery consisting of
- Seat Post
- TT handlebar
- Internal DI2 fixing
2) Complete racing bike tested
Frame kit made in China assembled by our technicians with the models shown below and tested to guarantee quality